Drupa 2024 Cason’s new application for double turret slitters

Events, News|

L'application brevetée TAPELESS REWINDING pour INNOVA MATIC 4.0 : la nouvelle solution pour les bobineuses automatiques à double tourelle made in Cason

Cason Srl présente une autre innovation intelligente pour ses bobineuses double tourelle INNOVA MATIC 4.0 : L’APPLICATION D’ENROULEMENT SANS BANDE ADHESIVE. Cette solution brevetée sera présentée au salon drupa de Düsseldorf (28 mai – 7 juin 2024).

Table des matières

Le développement de solutions fiables et innovantes est le résultat d’une expérience approfondie et d’une écoute attentive des clients de Cason et de leurs besoins, qui année après année confirment Cason comme un acteur international capable de fournir des innovations pour tous les secteurs de la transformation tels que l’emballage flexible et les industries du papier, des solutions qui peuvent utiliser à la fois les moyennes-petites entreprises et les grands acteurs multinationaux.

Les caractéristiques de l'APPLICATION BREVETÉE DE BOBINAGE TAPELESS de Cason

La solution conviviale pour l'opérateur pour les découpeuses

La première caractéristique de l’APPLICATION DE BOBINAGE TAPELESS est sa facilité d’utilisation.
L’une des difficultés rencontrées lors de l’introduction d’une fonction supplémentaire, dans les équipements modernes, est que la plupart du temps ces solutions, pour obtenir les résultats souhaités, deviennent compliquées et difficiles à régler pour l’opérateur qui a déjà beaucoup de variables différentes à gérer pour atteindre la productivité et la qualité des bobines souhaitées.

Pour cette raison, le département R&D de Cason a étudié une solution qui serait un réel avantage pour la vie professionnelle de l’opérateur, sans nécessiter de temps supplémentaire ou de compétences spéciales. Le résultat de cette étude est l’APPLICATION DE BOBINAGE SANS RUBAN ADHESIF, une solution “plug and play” harmonisée avec le cycle de la découpeuse.

Gain de temps direct et indirect avec les bobineuses automatiques à double tourelle

Une autre caractéristique importante de cette innovation intelligente est le gain de temps direct et indirect par rapport à la technologie manuelle ou automatique actuelle (rubanage du matériau sur le mandrin).

En mode manuel, l’opérateur doit consacrer du temps à chaque cycle pour mettre en place le ruban sur chaque mandrin avant le début du nouveau cycle, ce qui a un effet direct sur le temps pris par l’opérateur entre les cycles.

En mode automatique (avec un dérouleur de bande dédié), la vitesse de la découpeuse est réduite à chaque cycle pour permettre au dérouleur de positionner correctement la bande avant de changer de tourelle. De plus, le dérouleur doit être vérifié et rempli de temps en temps, en remplaçant le rouleau de bande et en effectuant quelques opérations de maintenance. Avec l’APPLICATION DE BOBINAGE SANS ADHESIF de Cason, aucun temps n’est consacré à ces opérations, ce qui rend le cycle de production fluide et sans blocage.

Solution multi-matériaux pour les découpeurs

Une autre particularité intéressante est la grande polyvalence de la solution.
L’APPLICATION D’ENROBEMENT SANS ADHESIF est une solution multi-matériaux qui peut être intégrée dans les bobineuses-découpeuses à double tourelle Cason, prêtes à traiter une large gamme de matériaux tels que les films plastiques, les films métallisés, le papier, les matériaux stratifiés et les matériaux semi-rigides.Cette polyvalence permet d’étendre l’offre de cette application spéciale à différents secteurs tels que l’emballage flexible, la transformation et les industries du papier.

Fonction de déblocage facile pour les bobineuses à couteaux

Un avantage particulier de l’APPLICATION DE BOBINAGE SANS ADHESIF de Cason est la possibilité de produire – en redémarrage automatique – de grands volumes de produits à décollement facile, une caractéristique très appréciée pour les marchés les plus récents de l’impression numérique et les applications de scellage à froid.

Cette caractéristique est très demandée par les utilisateurs finaux de nos clients dans les secteurs susmentionnés afin d’éviter d’éventuels bourrages sur les machines d’emballage final ou les unités qui traitent les bobines de nos clients.

Cette application brevetée de Cason a été développée dans le but de couvrir entièrement les différentes étapes du processus dans l’usine de production afin d’apporter une valeur ajoutée en facilitant les opérations et la maintenance des refendeuses et en rendant la configuration de l’équipement plus intelligente.

Cason et toute son équipe de vente vous attendront au Hall 11 stand 11F16 du salon international “drupa” à Düsseldorf du 28 mai au 7 juin 2024 pour vous présenter et vous montrer les opportunités extraordinaires que les bobineuses découpeuses Cason peuvent offrir.

Découvrez l'application TAPELESS REWINDING

L’application Cason’s sera présentée à la drupa

Vous avez des questions sur cette application ?

For our customers we are not just suppliers of machines but partners with whom to share projects, building solutions together and achieve ambitious goals.

Cason Srl - Via Parini 24, 21020 Montonate di Mornago (Va), Italy
P.IVA 01314000124


Privacy Policy Cookie Policy

cs_configurator_2.tiles.consent_widget.props.floating_button_display.options.manual.img_altLe tue preferenze relative alla privacy
Avviso di raccolta dati
Read More →

Drupa 2024 Cason’s new application for double turret slitters

Events, News|

La APLICACIÓN DE REBOBINADO TAPELESS REWINDING patentada para INNOVA MATIC 4.0: la solución más reciente para cortadoras rebobinadoras automáticas de doble torreta hecha in Cason

Cason Srl presenta otra innovación inteligente para sus rebobinadoras cortadoras de doble torreta INNOVA MATIC 4.0: la APLICACIÓN DE REBOBINADO SIN CINTA. Esta solución patentada se presentará en la feria Drupa de Düsseldorf (del 28 de mayo al 7 de junio de 2024).

Tabla de contenidos

El desarrollo de soluciones fiables e innovadoras es el resultado de una profunda experiencia y de una atenta escucha de los clientes de Cason y de sus necesidades, que año tras año confirman a Cason como un actor internacional capaz de aportar innovaciones para todos los sectores del Converting, como el embalaje flexible y la industria papelera, soluciones que pueden utilizar tanto las medianas-pequeñas empresas como las grandes multinacionales.

Características de la aplicación TAPELESS REWINDING patentada por Cason

La solución más cómoda para el operario de cortadoras

La primera característica de la aplicación de rebobinado sin cinta es su facilidad de uso.
Una de las dificultades a la hora de introducir una función adicional en los equipos modernos es que la mayoría de las veces estas soluciones, para obtener los resultados deseados, resultan complicadas y difíciles de configurar para el operario, que ya tiene que gestionar muchas variables diferentes para lograr la productividad y la calidad de bobina deseadas.

Por este motivo, el departamento de I+D de Cason ha estudiado una solución que suponga un beneficio real para la vida laboral del operario, sin necesidad de tiempo adicional ni conocimientos especiales. El resultado de este estudio es APLICACIÓN TAPELESS REWINDING, una solución plug and play armonizada en el ciclo de la cortadora.

Ahorro de tiempo directo e indirecto con rebobinadoras automáticas de doble torreta para cortadoras

Otra característica importante de esta innovación inteligente es el ahorro de tiempo directo e indirecto, en comparación con la tecnología manual o automática actual (encintado del material en el núcleo).


En el modo de encintado manual, el operario necesita invertir tiempo en cada ciclo para encintar cada núcleo antes de que comience el nuevo ciclo, lo que tiene un efecto directo en el tiempo que tarda el operario entre ciclos.

En modo automático (utilizando un dispensador de cinta dedicado), la velocidad de la cortadora se reduce durante cada ciclo para permitir que el dispensador coloque la cinta correctamente antes de cambiar la torreta. Además, el dispensador debe comprobarse y llenarse de vez en cuando, sustituyendo el rollo de cinta y realizando tareas de mantenimiento. Con la aplicación de rebobinado sin cinta de Cason, no se pierde tiempo en estas operaciones, por lo que el ciclo de producción es fluido y sin atascos.

Solución multimaterial para cortadoras

Una peculiaridad interesante es también la gran versatilidad de la solución.
TAPELESS REWINDING APPLICATION es una solución multimaterial que puede integrarse en las cortadoras rebobinadoras de doble torreta Cason, preparadas para procesar una amplia gama de materiales, como películas de plástico, películas metalizadas, papel, materiales laminados y materiales semirrígidos.

Esta versatilidad permite extender la oferta de esta aplicación especial a diferentes sectores como el embalaje flexible, la transformación y la industria papelera.

Función easy-release para rebobinadoras cortadoras

Una ventaja especial de la aplicación TAPELESS REWINDING de Cason es la posibilidad de producir -en reinicio automático- grandes volúmenes de productos de fácil liberación, una característica muy apreciada para los mercados más recientes de impresión digital y aplicaciones de sellado en frío.

La característica easy-release es muy solicitada por los usuarios finales de nuestros clientes en los sectores mencionados para evitar eventuales atascos en las máquinas de envasado final o en las unidades que procesan las bobinas de nuestros clientes.

Esta aplicación patentada por Cason ha sido desarrollada con el objetivo de cubrir completamente los diferentes pasos del proceso en la planta de producción para aportar valor añadido facilitando las operaciones y el mantenimiento de las cortadoras y haciendo más inteligente la configuración de los equipos.

Cason y todo su equipo de ventas le esperan en el pabellón 11 stand 11F16 de la feria internacional “DRUPA” en Düsseldorf del 28 de mayo al 7 de junio de 2024 para presentarle y mostrarle las extraordinarias oportunidades que las cortadoras rebobinadoras Cason pueden ofrecerle.

Descubra la aplicación TAPELESS REWINDING

La aplicación de Cason se presentará en drupa

¿Tiene alguna pregunta sobre esta aplicación?

For our customers we are not just suppliers of machines but partners with whom to share projects, building solutions together and achieve ambitious goals.

Cason Srl - Via Parini 24, 21020 Montonate di Mornago (Va), Italy
P.IVA 01314000124


Privacy Policy Cookie Policy

cs_configurator_2.tiles.consent_widget.props.floating_button_display.options.manual.img_altLe tue preferenze relative alla privacy
Avviso di raccolta dati
Read More →

Drupa 2024 Cason’s new application for double turret slitters

Events, News|

The newest solution for automatic double turret slitter rewinders made in Cason: the patented TAPELESS REWINDING APPLICATION for INNOVA MATIC 4.0

Cason Srl introduces another smart innovation for its double turret slitter rewinders INNOVA MATIC 4.0: THE TAPELESS REWINDING APPLICATION. This patented solution will be introduced at the Drupa fair in Düsseldorf (May 28 – June 7, 2024).

Table of contents

The development of a reliable and innovative solutions is the result of a deep experience and careful listening of Cason’s customers and their needs, which year after year confirm Cason as an international player able to provide innovations for all Converting sectors such as flexible packaging and paper industries, solutions that can use both medium-small businesses and large multinational players.

The features of Cason's patented TAPELESS REWINDING APPLICATION

The operator's friendly solution for slitters

The first feature of the TAPELESS REWINDING APPLICATION is its ease of use. One of the difficulties in introducing an additional feature, in modern equipment, is that most of the time those solutions, to gain the desired results, become complicated and difficult to set for the operator who already has plenty of different variables to manage to achieve the desired productivity and reels quality.

For this reason, Cason’s R&D department has studied a solution that would be a real benefit for the operator’s working life, no additional time or special skills are needed. The result of this study is the TAPELESS REWINDING APPLICATION, a plug and play solution harmonized into the slitter cycle.

Direct and indirect time saving with automatic double turret slitter rewinders

Another important characteristic of this smart innovation is the direct and indirect time saving, in comparison to manual or automatic nowadays technology (taping material on the core).

In manual taping mode, the operator needs to invest time each cycle to tape each core before new cycle starts, this has a direct effect on the time taken by the operator between cycles.

In automatic mode (using a dedicated tape dispenser), the speed of the slitter is reduced during each cycle to allow the dispenser to position the tape correctly before changing the turret. Furthermore, the dispenser needs to be checked and filled time to time, replacing the tape’s roll and doing some maintenance.

With Cason’s TAPELESS REWINDING APPLICATION, no time is spent on these operations, thus making the production cycle smooth and without any jamming.

Multi-material solution for slitters

An interesting peculiarity is also the high versatility of the solution.The TAPELESS REWINDING APPLICATION is a multi-material solution that could be integrated into Cason double turret slitter rewinders ready to process a wide range of materials such as plastic films, metallized films, paper, laminated materials, and semi-rigid materials.

This versatility allows to spread the offer of this special application to different sectors such as flexible packaging, converting and paper industries.

Easy-release function for slitter rewinders

A special advantage of Cason’s TAPELESS REWINDING APPLICATION is the possibility to produce – in automatic restarting – high volumes of easy-release products, a highly valued feature for the newest digital printing markets and cold seal applications.

The easy-release feature is highly requested by final users of our customers in the above-mentioned sectors to prevent eventual jams on the final packaging machines or units that process reels from our customers.

This Cason’s patented application has been developed with the aim to fully cover the different process steps in the production plant to bring added value by facilitating the operations and maintenance of the slitters and making the equipment setup smarter.

Cason and its entire sales team will be waiting for you at Hall 11 stand 11F16 of the international trade fair “drupa” in Düsseldorf from 28 May to 7 June 2024 to introduce and show you the extraordinary opportunities that Cason slitter rewinders can offer.

Discover the TAPELESS REWINDING APPLICATION

The Cason’s application will be introduced at drupa

Do you have any questions about this application?

For our customers we are not just suppliers of machines but partners with whom to share projects, building solutions together and achieve ambitious goals.

Cason Srl - Via Parini 24, 21020 Montonate di Mornago (Va), Italy
P.IVA 01314000124


Privacy Policy Cookie Policy

cs_configurator_2.tiles.consent_widget.props.floating_button_display.options.manual.img_altLe tue preferenze relative alla privacy
Avviso di raccolta dati
Read More →

Cason season’s greetings 2023

News|

Season's greetings 2023

Cason has been manufacturing industrial equipment since 1956, but in all these years we have never considered our machines just as machines.

Our slitter rewinders, handling solutions and bobbin strippers are the result of a mix of unique ingredients… high technology, mechanical precision, reliability and most important the human components.

Energy, enthusiasm and passion of the Cason’s team, agents and customers is the secret ingredient that makes since 67 years all Cason’s equipment appreciated and recognized worldwide.

We wish you season’s greetings and a bright 2024.

Read More →

Cason slitter rewinder machines – PLASTIMAGEN MEXICO

Events, News|

Cason slitter rewinder machines - PLASTIMAGEN

We are thrilled about Plastimagen Mexico, where, represented by Incotécnica, we have proposed the wide range of Cason slitter rewinder machines and the latest innovations.

The fair has been an opportunity for exchange and sharing, thanks to the Incotècnica team and all visitors who came to see us and showed great interest in our solutions.

Previous
Next

Following the success of the CASON OPEN HOUSE in September 2023, which was attended by customers from all over the world at our headquarter, Cason, represented by Incotécnica, is ready to meet you at stand 2522 at “PLASTIMAGEN” in Mexico City from 7 to 10 November 2023.

With Incotécnica we are ready to give at visitors a full overview of our range of slitter rewiders with a particular focus on physical and software features.

Cason slitters special features and handling solutions will be another important aspect to be shown at Incotécnica’s stand 2522.

Read More →

Cason Slitters series Evolution 4.0: discover the CASON HUB PLATFORM SYSTEM

News, Technology|

Cason slitters series Evolution 4.0: discover the CASON HUB PLATFORM SYSTEM

Table of contents

A new series of slitter rewinder machines from Cason

Customers from all around the world, both new and existing, have collaborated with Cason to create their new slitter rewinder, Evolution 4.0. This remarkable achievement comes after the official presentation of the series.

Among the various models, two have garnered significant demand: the INNOVA Matic double turret and the INNOVA Biback dual shaft, both incorporating the HUB PLATFORM SYSTEM. This cyber-physical solution combines physical integrations, technical solutions, and customizations to ensure streamlined, ergonomic, and efficient production cycles.

INNOVA MATIC Evolution 4.0

Cason HUB PLATFORM SYSTEM

The Cason HUB PLATFORM SYSTEM serves as the cornerstone of the Evolution 4.0 series. Cason seamlessly integrates functionalities in both the hardware and software of the machine, allowing for an efficient and adaptable slitter capable of handling different products and materials.

This proactive approach aligns perfectly with the customers’ expectations, enhancing the performance of their production plants with smart and fully integrated functionalities. By incorporating these functionalities into the machine’s software and the customers’ E.R.P., Cason simplifies and clarifies the management of all processes.

Like all Cason slitters, the Evolution 4.0 series prioritizes ergonomic design, ensuring ease, safety, and speed during operations. Each solution is thoughtfully integrated with a proactive approach to physical machine setups.

A dynamic solution for Cason slitters

The HUB PLATFORM SYSTEM is a dynamic solution that enables future integration of automations or external features into the slitter rewinder unit. With multiple access points for customizations and integrations, such as robotic unloading, perforator units, web cleaning systems, tape dispensers, and auto core loading and positioning, the Evolution 4.0 series offers extensive flexibility.

Cason INNOVA MATIC Evolution 4.0 integration

A notable example of the HUB PLATFORM SYSTEM’s capabilities is the integration of the INNOVA MATIC Evolution 4.0 double turret slitter rewinder with an ABB anthropomorphic robot. This integration extends beyond physical and electronic connections. Leveraging the HUB PLATFORM SYSTEM, the software of the robot and the slitter are interconnected and auto programmable, resulting in a unified control panel that is user-friendly and customizable by the operator.

This solution enables fully automatic and flexible unloading operations without human intervention, ensuring high productivity, enhancing operator safety, and reducing labour costs within the plant.

CASON DEMOCENTER

CASON DEMOCENTER provides an innovative approach to explore our slitters. Through the collaboration between the sales department and the production area, located entirely at our headquarters, we offer the opportunity to schedule live tests with our slitters using your materials. It’s a new way to develop customers’ projects.

The new approach of Cason slitter rewinders

Davide Da Zanche, sales director of Cason, emphasizes that “the Innova Matic Evolution 4.0 series is not only a collection of technical features and innovations for slitters but also a fresh approach to understanding customers’ projects. With the strong foundation of the HUB PLATFORM SYSTEM, customers can collaborate with us to tailor their slitters according to their specific production needs”.

Follow us

Read More →

Cason bobbin strippers – OPEN HOUSE June 2023

Events, News|

Cason bobbin strippers OPEN HOUSE - June 2023

Discover the textile machines AC3 and 2M/T2-A in operation

With visitors from over 15 countries visiting our Headquarter in Montonate di Mornago and testing our bobbin strippers AC3 and 2M/T2-A, the OPEN HOUSE went far beyond our expectations!!

Our OPEN HOUSE is getting closer, from 8th to 14th June 2023 come and watch a demonstration regarding the fully automatic bobbin stripper AC3 and the manual bobbin stripper 2M/T2-A in our Montonate di Mornago Headquarter.

Discover with our sales and technicians our bobbin strippers, we offer solutions with: manual, semi-automatic or automatic loading of tubes.

Read More →

Discover and test the slitter rewinder machine INNOVA MATIC Evolution 4.0 Wide Application

Events, News|

Discover and test INNOVA MATIC Evolution 4.0 Wide Application

We are thrilled to invite you in September 2023 in our Montonate di Mornago Headquarter to test the latest slitter rewinder INNOVA MATIC Evolution 4.0 Wide Application.

In OUR DEMOCENTER it will be possible to test it with your materials.

Read More →

Fully automatic slitter rewinder Innova Matic

Events, News|

Fully automatic slitter rewinder Innova Matic Evolution 4.0 endless integration

Discover Cason slitters at Flex On Road with Uteco and Eurograv

Share on facebook
Share on linkedin

Just after installation of our new slitter rewinder INNOVA MATIC Evolution 4.0 endless integration  in UK accomplished successfully in January 2023, Cason team has presented during the Flex On Road – in partnership with Uteco and Eurograv – the latest engineered integrations developed for  slitter rewinders and the different Handling solutions.

Cason-slitters-Flex-On-Road-Uteco

For our customers we are not just suppliers of machines but partners with whom to share projects, building solutions together and achieve ambitious goals.

Cason Srl - Via Parini 24, 21020 Montonate di Mornago (Va), Italy
P.IVA 01314000124


Privacy Policy Cookie Policy

cs_configurator_2.tiles.consent_widget.props.floating_button_display.options.manual.img_altLe tue preferenze relative alla privacy
Avviso di raccolta dati
Read More →

Cason season’s greetings

Events, News|

Cason's season's greetings

An idea is a light that lights up… many ideas light the way to achieve results.

Cason is the place where ideas become reality and in 2022 we have realized ambitious projects, presenting innovative solutions and new technologies requested and appreciated by the market.

The excellent results that we have achieved were made possible by great enthusiasm and passion of our team, our clients and our agents, that have brighted all our 2022 with brilliant ideas.

We wish you a season’s greetings and a bright 2023.

Read More →
VISIT CASON SRL
HALL 11 STAND F16
Cason Srl drupa 2024

The patented application will be introduced at drupa